I have a setup where there is a comcast modem and a firewall. The firewall is acting as the DHCP server and handing out ip addresses. The comcast modem is only acting as a modem. The firewall had a ...

Rich Long found that he could not get his MacSense XRouter Pro (MIH-130A) to work with DHCP and Mac OS X 10.0.2. But he found a solution. He writes: "The symptom I saw was that the Mac would receive ...

The DHCP Lookup Failed problem indicates that your PC was unable to obtain an IP address from the DHCP server. To interact with the router and the internet, each device requires an IP address. DHCP ...

OK, so I have a subnet (192.168.11.0) that currently has all servers and clients on it. It's running out of addresses. So, I create a new subnet (192.168.12.0) and change my DHCP server (Fortigate ...

A dynamic host-configuration protocol issue leaves wireless users unable to connect, and with no permanent fix, the solution is an ongoing workaround. Dynamic host-configuration protocol (DHCP) has a ...

Years ago, I used to be a network administrator for an organization that had some rather odd security policies in place. One of the existing policies when I got there was that all computers had to be ...

Dynamic host configuration protocol (DHCP) still assigns dynamic addresses for IPv4 networks, but two newer protocols – SLAAC and DHCPv6 – are vying to do the job for IPv6. Dynamic Host Configuration ...

Checking your computer's IP address every time you need it can get tedious. Here's how to set up DHCP reservations on your router so that each computer in your house has the same IP address all the ...

DHCP stands for dynamic host configuration protocol. What it does is dynamically assign network settings from a server. In other words, instead of having to configure the parameters related to how ...

In most home networks, a router’s DHCP service automatically assigns IP addresses to the devices, requiring little to no manual setup. That worked fine at first in my home, but over time, I began ...