This simulation demonstrates a Full Wave Rectifier circuit using four diodes arranged in a bridge configuration. The input is a 10 Hz AC signal, and the output across the 1 kΩ resistor shows a rectified waveform where both halves of the AC signal are converted into pulsating DC. The graph above displays the input, output voltage, and current, clearly showing the full-wave rectification effect with continuous positive cycles. #ElectronicsEducation #electronicsrd #Electronics #rectifier | Electron

This simulation compares three half-wave rectifier circuits. The first one uses only a diode and a 100 kΩ load, so the output is just positive pulses that follow the AC peaks. The second circuit adds a 100 nF capacitor across the load. Because the value is small, the capacitor charges at each peak but discharges quickly, creating a large ripple with a slowly falling exponential shape. The third circuit uses a 100 µF capacitor, which stores much more charge. It holds the peak voltage for a longer